Tuesday, September 17, 2013

Methods on Protecting Plants Over Winter

Winter is coming! It is time to prepare you patio or deck, close down your sun shades, outdoor umbrella, and secure your patio furniture. But don’t forget your garden and plants.

During winter season, plants have to go through frost, cold temperature, and very wet soil. Without proper protection, your plants will suffer from frostbite and root decay. You need to exert extra effort to help the plants survive in this harsh outdoor condition. Depending on the type of plant, how you plant them, and where they are planted, there are useful methods on protecting them over winter.

To be very effective, you need to identify your plants if they are able to survive the winter and how much warm, water, and light needed for them to thrive.

Greenhouse and Temporary Shelter
Greenhouse can keep plants safe from the freezing temperature. You can build a small one in your backyard for your plants. And If moving your plants cannot be done, then build a temporary shelter right in their place.

Building a greenhouse or temporary shelter is easy using common materials found in home improvement and hardware stores, and even scrap materials around your house. You can use either solid plastic tubes, metal tubes or rods, or wood for the frame. Then you can wrap it using plastic sheeting or with some unused clear glass panel.

Mulching
A mulch has lots of uses such as stabilizing soil temperature, preventing weed growth, and keep soil moisture longer. These uses are also vital for plant survival during winter.

Materials for mulch can be organic or inorganic but the effect is pretty much the same. It can insulate the soil from the freezing winter temperature.

Cover
Putting cover on is the easiest, quickest, and a practical method. But you should take off the cover when the sky is clear so that the plants can get light and air.

You can use a thick plastic, a piece of cloth, or a tarp. Put it on the plant and tie it down securely.

Bring It Indoors
If you have ample space indoors or in your garage or shed you may also bring your plants in. This is easy for potted plants and if you can you may also want to transfer your plants in a container. It would be better to place them near the windows or in any spot that they can get some light.

Some of your plants may not be suitable in an indoor environment. However, they’ll have a good chance of surviving until spring inside a shelter than left in their freezing habitat.

You may not be able to save all of your plants, but  with these methods, you will be able to bring back your patio, deck, and garden to bloom soon as winter ends.

Monday, September 9, 2013

How to Prepare Your Patio or Deck for Winter


A patio or deck, specifically the wooden portions, is potentially prone to deterioration during and after winter. Therefore, to avoid greater adversity, preparing your patio or deck is necessary. Taking some good preparatory steps should prevent damages and lessen the problems caused by snow and moisture.
Preparing your patio or deck for winter is easy. The steps are fairly similar to maintaining your patio that you do every year or season by season. It includes cleaning, refinishing, and sealing. You’ll also need to do some repairs even if it is just a little crack or chipping.

Clearing
Before you can actually thoroughly clean your patio, we will need some clearing operation. It means taking away items that can cause damage and items that can be ruined during winter.

Remove items that cover your deck or patio flooring. Usually we use floor mats, carpets or rugs to cover our floor and as additional outdoor decoration. These will catch and hold moisture. The materials can be a good ground for mold and other organisms that aid in their deterioration and the materials where it is on.

Things like some patio furniture items especially those made of wood or real wicker patio furniture sets are vulnerable to rot. You can store them inside your house or garage. They can be left outdoors but be sure they are properly sealed and provided with cover.

The same goes to patio umbrellas. You can store them away but make it sure they are properly cleaned and dried to avoid mold and rust. Some umbrellas such as fiberglass and aluminum patio umbrellas can be left outside. Just provide them a protective umbrella cover and securely tie them down.

Cleaning
Here is a useful article on how to clean your patio and on how to remove mold. In addition, here is how you can clean a wooden deck.

A dishwasher soap would suffice in regular deck cleaning. A mixture of about ¼ cup of the soap and a bucket of water is enough. Wet your deck, brush or scrub the mixture, then rinse.

For hard stain, a good pressure washer is best for the job.

Refinishing and Sealing
Sealing your deck or patio adds a protective coating to prevent finish and surface deterioration. In preparation for winter, you should choose a waterproofing wood sealer.

You should remove old or unwanted finish and apply a new one before you seal your deck or patio. You would not want an old and dull looking but newly sealed deck right?

There are many products on removing wood stain or finish and deck sealers. Ask your nearest home improvement and hardware stores for the right type and combination.

Tuesday, September 3, 2013

Best Ways to Clean a Patio

Have you ever wonder what is the best way to clean a patio? There are many ways. However, there is one that gives a better result for a specific type of material your patio is made of. Another factor to consider in finding a better way is the kind of stuff that you need to get rid. Stuff like weed, molds, oil and other stains require some tough job or strong solutions. Most of the time you would need special tools and chemical formulations.

Before going over to the best ways, let us consider the basic patio cleaning first.

First, you need to remove all your outdoor furniture items and fixtures out from the patio and place it in a safe spot. You do not need to move them far away, a large plastic cover will be good to protect them while you are working. This will clear your patio for easy cleaning, plus, it allows you to see all the surface including those little spots that are supposed to be covered by the patio seats, tables, and outdoor umbrellas.

Then simply sweep and wash away the dirt and debris.

The good thing about doing the basic cleaning is that you will able to see clearly the type of stain or dirt that cannot be removed easily. It makes it easy to determine which cleaning way that you need to apply.

A patio can be made of many different types of materials. But generally, they are made of concrete and stones. These two have different texture and so requires different approach.

Concrete Patio Cleaning
The best approach to cleaning a concrete patio is by using a power washer or pressure cleaning. With a good power washer you can transform a dirty and dull concrete patio to look like new.

Alternatively and in addition to pressure washing, you can use bleach to remove tough stains and mold. Dilute a cup of chlorine bleach into a bucket of water. Apply it using a brush. It is important to apply the bleach into the entire surface area and not just some spot because it may result into an uneven color shade afterwards. Allow it to sit for about 10 minutes to react with the stain and mold, then rinse.

If the concrete is stained with grease, a degreaser which is available in stores is all you need. Same simple steps, apply it to the area stained with grease, scrub it off, then rinse.

Stone Patio Cleaning
Pressure washing is also the best way to clean a patio that is made of stone. However, it has some limitations and precautions. Some stones cannot withstand high pressure from power washer. Water pressure can chip off stone pieces. Some stone patio paver are decoratively laid with gravel and sand between the gaps and these can ricochet and hit something or someone. Wear some eye protection and thick clothes when you do this.

If you found out that pressure washing is not applicable, then, here are some alternatives.

You can simply use soap mixed in water. Pour it directly to the stone and leave it for at least a couple of minutes. Then scrub the stones with a stiff brush. If you found it hard to remove stains and mold, you can also use chlorine bleach diluted in water.

In conclusion, it seems like pressure washing alone can do best. Yes it does and not only that. Pressure washing helps you clean your patio without using chemicals that pollute the soil and are directly harmful to the plants.

Additional tips!
Declutter your patio. Do not place back in unnecessary items. It will make your patio design to look neat and organized.

Clean your patio furniture and outdoor patio umbrella as well to make them look new on your patio.

Tuesday, August 20, 2013

How to Remove and Prevent Mold on Patio Concrete and Bricks

Molds are very unpleasant. They multiply easily and quickly invading and ruining your patio design. They can even creep into your outdoor furniture and fixtures inflicting some damage. So removing them as soon as possible becomes important. But do you find it hard to remove mold on patio concrete and bricks? Do feel frustrated seeing that only a few have removed after all your efforts? Well, removing nasty mold on concrete and bricks is easy if you know how.

Fighting mold is struggling against a resilient enemy. To defeat them, you just need to know them very well.

It is a common knowledge that mold grow on humid and moist areas. Now, here is what make them more resilient. Dirt and dust can easily caught on the porous concrete and bricks. They will eventually build up between the grooves and brick lining. The trapped dirt hold moisture making a great recipe for mold to grow, but that does not end there. The absorptive characteristic of concrete and bricks maintains a moist area for molds to thrive even after cleaning.

What makes it so hard to remove? Because concrete and bricks are naturally porous, mold grow deep within the material. Or, perhaps the chemical solution used is not of the right amount and proportion and maybe you did not do it right. There are  great ways, like the following, to make removal easy.

Removal
Mold removal can be so much better if you use a pressure washer.

The first solution is commonly available in every household, chlorine bleach. Mix the bleach with water and apply it with spay to the affected area. Let it set for a few minutes giving it time to react with the mold but do not let it dry. Rinse thoroughly and see the result. If you noticed it did not remov the mold completely, don’t worry, we will take another step.

The next solution is muriatic acid. This is a very effective cleaning solution but dangerous. Extreme precaution must be applied before using this one. Be sure to wear safety gears such as thick rubber gloves, safety glasses, boots or shoes, and a respirator. Wear used clothing but make it sure that you use long sleeve shirt and pants to cover all your skin.

Before making the mixture, be sure to have a plenty of water and have a running water hose on your side. It will be used to dilute the acid and wash off when some will come in contact with your skin and some unwanted spills.

Important! Keep children away from the working area. After using, dispose the empty bottles properly or rinse it a few times to be very safe. If you keep muriatic acid at home, store it safely away from the reach of children.

Using a plastic bucket, mix 1 part acid to 3 parts water. Wet the area and apply the solution using a cleaning brush. Brush as you go to let the mixture set in the surface thoroughly. Let the acid to react with the mold for about ten minutes and then rinse it thoroughly.

Lastly, if you don’t want to go through these task, then it is best to hire a professional to do the job. Look specifically for mold removal and remediation expert.


Prevention
We know that the mold problem is caused by dampness. An area that is humid and retaining moisture is most likely to get mold even after cleaning thoroughly. Its is wise to take actions to prevent them from coming back.

Killing mold spores is not applicable in a patio. What we need to do is protecting the concrete and bricks and minimizing the moisture retention.

Consider sealing the brick and concrete. Sealing does two in one, giving a good appearance and protection.

Making your patio dry in a day is also helpful. It minimizes the chance of mold growth. It can easily be done by using the sunlight. Identify areas that are blocked by sunlight all day long. If possible, clear the shades that block the sunlight to let much of the patio space receive a full sunlight even for few hours.

Try to rearrange patio furniture and take rugs and carpets off sometimes to expose your patio paver to sunlight. If you are using a patio umbrella, you may close it sometimes when not in use to let the sunshine in.

Wednesday, August 14, 2013

How To Make Your Patio Concrete Look New

An old patio concrete looks dull, pretty boring, and maybe untidy. Sometimes, we do not notice it especially if your patio has a lot of patio furniture and fixtures around. It can also be concealed with by a large carpet you put on the floor. But in reality, it makes your patio space a lot less interesting.

If you are worried about it and want a change, then, there are foolproof solutions.

What about pressure washing? Yes, it will work, but not enough. If you have tried it and found not satisfying, then it’s time to consider the solutions that guarantee great outcome.

Concrete Staining
Concrete staining is an inexpensive way to change an old patio making it new once again. It is basically similar to painting that effective change the color and appearance of your patio concrete. However, the procedure, materials, and coating solutions are entirely different.

Concrete stains available in the market today come in many colors. With the right combination, the colors can simulate many types of finishes for the concrete such as stone and even wood colors.

There are many effects that can possibly achieved with concrete staining. At the very basic, you can make the whole patio concrete a huge slab of marble. But with the wild imagination, an entirely different appearance can be created. You can make grooves or cut on the concrete to make it look like a tiled floor. Stain each block with different colors to mimic a checkerboard. You can also make geometric shapes and stain each piece to create a structured or abstract design. You can find many concrete patio design ideas to start in the internet.

Concrete Resurfacing
Resurfacing a patio concrete is a very different approach. This type of transformation is more expensive, but it yields great and solid result. It adds a new layer of concrete, thus, giving the concrete a new look and feel.

Also, resurfacing is the only best solution if you want to change or improve the surface texture of your patio concrete. But please note that it does not fix damages even for small cracks. They are especially made for surface improvement only. You have to repair the damages first with additional cement or with concrete sealant.

Concrete resurfacers has the same color of newly poured concrete, gray. But you can add colorants to make a different concrete surface. With different colors, you can also simulate different flooring effects like tiled and stone finish.

Either of these solutions, you can give a new look for your patio. Making a new patio concrete finish is very helpful to recreate the mood of your patio. With so many finishes achievable, you can easily make a new look that matches with your existing set of patio furniture and fixtures such as metallic, teak, or wicker patio furniture sets.

Wednesday, August 7, 2013

Patio Paver Materials and Their Advantages

Laying patio pavers can be really easy or very difficult depending on the type of materials, let alone skills. There are a number of different types of materials to choose from in which each of them has different ways to build. The easy way can be just laying the materials down on the ground similar to assembling a jigsaw puzzle, and the harder way would require some masonry skills.

There are factors to consider when choosing the right paver material. First, it should mix and match with your house because a patio is an extension to your home and it should not look odd. Then you can choose the right surface texture and color.

We would love to consider the cost, cheaper is better, but it can affect the quality and durability. It would only add very little value to your property.

Here is a list of patio paver materials:

Concrete
Concrete is slightly cheaper and is a good start in building a patio. At the very basic, it can give you a solid and plain base for your patio furniture and fixtures.  However, its versatility made it famous. It can be made into different finishes and textures that you can imagine. Possible textures can be done in many ways such as brushed, acid washed, and stamped. Effects like brick, flagstone, and other stone and decorative patterns can be achieved with stamping.

Tile
Tiles come in many types, textures, and colors. Texture ranges from a very smooth surface to rough stone-like features. With the right type, you can also simulate different effects such as bricks and stones.

This type must be the choice if you want a smooth and fine finished patio.

Brick
Brick pavers are classic and has been the popular choice for a long time. A creative mind can get the most out it because bricks of different shapes and colors can create endless design possibilities.

Bricks can help create a cozy ambiance through the classic and traditional appearance. They are also great for creating a garden patio.

Stones
For nature lovers, stones are great for simulating or emphasizing a nature inspired patio landscape. There is a wide array of stone types with different textures, shapes, sizes, and even colors to help create a unique patio environment.

Stones like limestone, sandstone, slate, and granite are most widely used. You are lucky if you are located near quarries because they are cheaper there, otherwise, they are costly. However, a well designed patio created with these stones adds a significant value to your property.

Anyway, you can combine some of these materials to create your patio. A combination of several types might even yield greater results. Imagine sitting on a lounge chair under a lovely patio umbrella in your fine tiled patio with stone pebbled borders. Or relaxing under a tiki umbrella in your tropical-themed stone patio. There lots of design ideas around. You can find more of them in the internet.

Tuesday, July 30, 2013

Two Ways of Home Improvement and Their Advantages

A home improvement project can do a lot of great things to your property. Aside from adding a new interest, it also brings part of your home back to its mint condition. It is also a great opportunity to detect and spot damages or issues that needed to be addressed. Repairing a small damage right away is crucial as it prevents potential problems to aggravate.

A good home improvement project also increases the value of a property.

There two ways a home improvement can be accomplished. One is to do it yourself popularly known for its acronym DIY. Another is by hiring a professional to do the job. Choosing which way to go depends on your budget, time to spend, skills, or deadline.

These two ways have advantages and disadvantages. It is very helpful if you know them to help you decide which route you should go.

Do-it-yourself (DIY)
Basically, DIY is cheaper and it saves you a significant amount of money. It is a good activity for your family especially on weekends as a great time for bonding. Doing it yourself allows you to decide what exactly you want for your home.

However, a DIY project requires time, energy, and skills. Time is not a problem at all if you are not a really busy person. We can always find time during weekends or during work day-offs at least. As for energy, you really need some. Skills are also needed but most of them can easily be learned. Besides, you can find really easy DIY project instructions in the internet.

A patio is a popular home improvement project. It is really easy to do once you get the idea. As an example, here is a list of what you need to create a patio place.

To get started you’ll need a backyard space. You don’t have to construct a structure for a roof. Just lay some bricks or concrete for the flooring. Place a set of teak patio furniture, wicker outdoor furniture set, or a little bistro set. Add a patio umbrella or a cantilever umbrella for your shade under the sun. Add some decorative accents like potted plants, and voila, you now have a patio place.

Hiring a Professional
If you don’t have the time, energy, or skills, then hiring a professional is a better option. Of course you should hire an expert and you need a bigger budget.

On the other hand, you have many advantages going this route. You can now have the project done in a short period with great results because the professionals have all the tools and essential skills.

You’ll only need to sit down with the professionals and discuss the plans, the budget, and the fees for the project. It is important that the project is well coordinated so that you can get your expected results. Once the planning is done, you’ll just sit back, relax, and see the project as it progresses.